This product is designed for warming the heel of metal into steel ladle. Product helps to cover the metal surface and to limit the access of oxygen to the metal surface, providing protection against extreme temperatures. Application: recommended for all steel grades. Served in polypropylene bags by hand or with a crane in big bags. The advantage of this material is a mixture consumption - 0,32 kg / t steel (4-5 times lower than in the Ukrainian producers of similar products), as well as high fluidity.
Product designed for thermal insulation in the mirror metal tundish. It helps to cover the metal surface and to limit the access of oxygen to it, providing protection against extreme temperatures. Application: recommended for all steel grades. Served manually in polypropylene bags.
This product is designed for warming the heel of metal in the molds. Products help to cover the metal surface and to limit the access of oxygen, providing protection from extreme temperatures, prevents cavities. Application: recommended for all steel grades. Served in polypropylene bags by hand or with a crane in big bags.
This material is used to protect the metal in the mold of continuous casting machine. Mixtures made by mechanically mixing the components previously prepared with stable characteristics by adding different fluxes. The mixture provides a stable properties of the protective coating, trouble free operation of the equipment of ÑÑM, reduce vibrations pull force on slab CCM, thereby increasing output continuously cast section and suitable rolled steel.
Ladle tapping hole filling mixtures based on chromite sand (South Africa). It is used for filling steel-tapping holes of sliding gate of ladles and tundishes to provide the self-opening start of pouring. The percentage of self-opening of sliding gate while using our mixtures is 98%.
Ramming mixture for risers of tundish. Can be used to fettle the risers of metering unit and the bottom of tundish. It is recommended to use this material for different steel types.
Gunning mixture is used for application of the fettle working layer which is in contact with the molten metal in the tundish. It is applied with the mechanized method using special equipment for the gunning of tundish.
Lightweight concrete. Scope: designed for heat insulating of high-temperature thermal generating units of different purposes, heat and power vessels and equipment, reheat furnaces, chemical reactors, metallurgical outfit and conveying chute.
Protective coating. Designed to protect send-resin cores and forms from metal penetration while pouring. It is an aqueous-alcoholic solution with such types of fillers: magnesite, zirconium silicate, graphite, distensillimanite.
It is intended to cover the molds to produce higher quality surface of the finished product. It is applied by brush or spray.
Own production lubricant has extreme pressure properties for heavy usage environment. It is a gray-black graphite-based paste with synthetic component; does not contain lead, copper, sulfur and their compounds, and heavy metals. The product is used as a lubricant in the temperature range from -30 °C to + 1350 ° C, can be applied on any metal and ceramic surfaces (including stainless steel, nickel alloys, zinc-plated surface).
This product is used for mounting structural products by gluing the individual parts of alumina ceramic fragments refractory lining of corundum, and for the repair of various products corundum structure partially destroyed during firing or during operation. Advantages: the term of storage up to 1 year; tabular alumina content of not less than 85%.